M1200-BR Explosive Storage Magazine
Type 2 Outdoor Bullet Resistant Design

Type 2 Magazines are made for the storage of High Explosives and are made for indoor or outdoor storage placement. Per ATF regulations an indoor magazine may not hold more than 50 Lbs. of explosive materials and outdoor magazines must be built to a bullet resistant design.

Our Explosive Storage Magazines are portable and can be placed in most locations with a flat surface. These magazines are built for turn-key installation which also allows for easy relocation if needed.

Type 4 Magazines are designed to store Low Explosives and can be placed indoors or outdoors. Our Type 4 magazines are made of steel and are all weather, theft and fire resistant. These units are constructed of a 12 gauge, formed, outer wall and are lined on the interior with ½” plywood sheets. 2 hooded hasps for padlocks are placed on the door to prevent tampering and forced entry.

Type 2 Outdoor Magazine Bullet Resistant Design
Dimension: 100"H x 84"W x 108"D

No. of Doors: 1 - 42" W x 80" H door

Shipping Weight: 8580 Lbs.

Approval: Meets or exceeds ATF specs 27 CFR 555.11.

Warranty: 15 Year Limited Structural Warraty

NOTE: Magazine may require State Approval. Please check with your Local Authorities (ie: Fire Marshall) to determine if State Approval and/or State Seal are required. Additional charges and lead times may apply.

Lighting & Electrical
	OP0001A - Additional Explosion Proof Interior Light	$573.00

Technical Details :

	Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
	Magazine constructed with double wall, welded construction with 3” airspace throughout.
	Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is either 12 (Fire Rated) or 18 gauge galvannealed steel.
	Interior walls made of 3/8” Steel Plate.
	Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
	Door - 1 - 42" W x 80" H. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made of Bullet Resistant construction with a 1” overlap on all sides.
	Door Panels grounded to wall face.
	Multiple Static Grounding Connections.
	Inlet Vents for natural ventilation.
	Lifting Lugs.
	Removable Caster Assembly (800Lb. capacity per Caster) - or - I-Beam Base Support with Fork Channels.
	Hazard Labeling.
	Finish is a two-part chemical resistant aliphatic polyurethane.